[GNATMAN]

Yep. Getting it to return is the issue. If your Atlas doesn't have the memory module for it (which it almost for sure doesn't) then it won't work correctly.

Sel with memory seats so I would hope it has memory as the mirrors move for that aspect

 

[KarstGeo]

Sel with memory seats so I would hope it has memory as the mirrors move for that aspect

Then yes with the mem seats it should. This should already be active then and require no coding...have you set them up per the owner's manual?

 

[8819]

@GNATMAN There's kind of two things that need to be done. Activate in the MIB3 car, setting option and after you need to follow to procedure to set your prefered tilt with the mirror knob turn right. I was working for me, but now I want to change the tilt setting I have done but I do not find how to reset my actual reverse tilt setting

 

[Dwebstert]

The steps are shown in the Owner's manual. I am at work and cannot post the steps.

 

[agriganosa]

Does anyone else notice vr6 has a very weak acceleration from 2-3k rpm? feels like is anchored. very unequal acceleration from low end to top end. If i floor it from stop it doesnt happen, but lets say you take a 90* turn and you start accelerating, that 2-3k rpm range feel like I am driving a bus. Anybody know if this is awd feature or transmission tuning? Anyway to get rid of that anchor feel? I tried coding stuff and it just doesnt work, all 3 driving modes do that.

 

[ClevelandITGuy]

Hey VCDS wizards! I have a request for coding/adaptation. I used to own 2005 Audi A6 and I had rear fog lights when I twisted the fog light knob, then pulled it out. All it really did was increase the brightness of a single set of lights in the rear tail light cluster. I bought a Euro headlight switch with the rear fog light position, but I was wondering if there was a way to program it to be the inner set of lights (circled in yellow). I saw another post where they replaced the switch, told the computer that the rear fog switch was installed, but they used the drivers side only reverse light as the rear fog and changed the bulb to red. I'd like the rear fog switch to illuminate both inner tails to 127.

2019 Atlas SE R-Line w/Tech

 

[sstanley511]

So, I only have the SE w/Tech, and don't own an ODB11, etc. etc., but these discussions are fascinating. Thanks, fellow car enthusiasts. It is nice to know that even if our spousal unit has made us wade into the SUV world, we can still have some fun.

 

[KarstGeo]

Hey VCDS wizards! I have a request for coding/adaptation. I used to own 2005 Audi A6 and I had rear fog lights when I twisted the fog light knob, then pulled it out. All it really did was increase the brightness of a single set of lights in the rear tail light cluster. I bought a Euro headlight switch with the rear fog light position, but I was wondering if there was a way to program it to be the inner set of lights (circled in yellow). I saw another post where they replaced the switch, told the computer that the rear fog switch was installed, but they used the drivers side only reverse light as the rear fog and changed the bulb to red. I'd like the rear fog switch to illuminate both inner tails to 127.

2019 Atlas SE R-Line w/Tech

View attachment 3194

Should be the exact same as you do on the MK7 Golf platform. Are you tails factory LED or incandescent?